0.141 in. Diameter hole cross drilled and perpendicular to hole center line second end 1.250 in. Long; second end threaded 1.250-12unf-3a
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 2925-00-936-4333
NSN 5910-00-526-8005
NSN 5998-00-044-4797
NSN 5855-01-312-5160
NSN 6645-01-430-7124
NSN 7035-01-314-7559
NSN 5998-00-184-6321
NSN 6110-01-051-1395
NSN 5905-01-054-3393
NSN 5950-01-514-4154
NSN 5950-01-190-7523
NSN 5999-00-351-4550