No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 4140-01-133-1512
NSN 6105-01-401-5361
NSN 6130-00-935-5589
NSN 5835-00-920-7325
NSN 5965-01-658-0746
NSN 6320-01-113-7647
NSN 5975-00-113-7312
NSN 5835-00-675-5159
NSN 5910-01-461-3108
NSN 5915-00-558-4413
NSN 5985-00-116-8450
NSN 5975-01-428-9118