No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5930-00-901-4657
NSN 5910-01-106-7548
NSN 6105-00-189-7130
NSN 5975-00-582-1460
NSN 5996-01-609-1891
NSN 5965-00-823-8623
NSN 5990-01-411-5930
NSN 6110-00-212-9130
NSN 6110-01-230-8857
NSN 6610-00-391-7888
NSN 5935-00-827-5022
NSN 6150-00-153-3196