A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Dept. of the Navy 
Italy 
Turkey Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6610-01-160-6585
NSN 6110-00-910-6537
NSN 6145-01-622-0035
NSN 5985-01-594-8206
NSN 5999-00-078-6804
NSN 6610-01-425-1523
NSN 5965-00-505-2166
NSN 6220-01-007-1912
NSN 6150-00-158-0066
NSN 5925-01-032-3461
NSN 6685-01-247-0470
NSN 5999-01-174-3234