No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6130-00-302-7823
NSN 6130-01-431-9231
NSN 6240-01-123-9040
NSN 5996-00-444-9832
NSN 5996-01-038-9994
NSN 6135-00-676-5807
NSN 5965-00-215-0307
NSN 7035-01-557-7142
NSN 5915-01-165-6224
NSN 5910-01-625-5332
NSN 2925-01-055-9705
NSN 5920-01-141-6885