Used on continental reciprocatingengines & comp
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-01-111-3962
NSN 5975-01-166-4560
NSN 5998-01-242-9701
NSN 6645-01-333-5810
NSN 4140-01-444-4464
NSN 5905-01-415-2208
NSN 5895-01-280-5182
NSN 5935-01-527-6278
NSN
NSN 6110-01-106-4440
NSN 5935-01-167-1606
NSN 6220-01-218-3330