No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5895-01-365-2724
NSN 5998-00-826-9332
NSN 6610-01-473-5678
NSN 6110-01-498-5120
NSN 5990-01-166-2237
NSN 6645-00-192-1152
NSN 6650-00-210-4399
NSN 6610-00-482-5746
NSN 5935-01-394-4312
NSN 6130-01-260-8193
NSN 5895-01-491-9133
NSN 5950-01-422-1361