Washer, flat; steel; cadmium plated; 1.594 in. Max o/a peripheral dia, 1.344 in. Max center hole dia, 0.063 in. Max cross-sect thk
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6105-01-592-3152
NSN 5855-01-241-1054
NSN 2925-01-259-7092
NSN 6650-00-095-6490
NSN 5999-01-473-8346
NSN 6320-00-725-0754
NSN 6610-00-442-6834
NSN 5996-00-191-2133
NSN 5945-01-123-8685
NSN 5915-00-722-0775
NSN 5990-01-229-0222
NSN 5999-01-489-6139