Steel; 1.5 in id of bore, 6.375 in lg; 4.739 in w; 2.406 in h; 5.125 in h from bottom of base to bore center line; drilled for lubrication fitting, 1/8-27, npt thd hole, perpendicular to bore center line on base drilled for pin; 0.75 in diameter hole, 4.063 in from c of bore to c of hole; bar welded on od of eye
A rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes housing, bearing unit (as modified).
Classification: Shaft couplings, except universal joints
NSN 6610-01-613-5689
NSN 5855-00-560-0110
NSN 6240-01-467-9719
NSN 6620-01-535-1230
NSN 6685-01-374-5818
NSN 6645-01-619-2756
NSN 5960-00-355-7307
NSN 6650-00-955-2802
NSN 5998-00-340-9843
NSN 5905-01-524-5989
NSN 5998-00-460-8161
NSN 5950-01-484-4883