No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 4140-01-164-8298
NSN 2925-01-564-2617
NSN 6610-01-144-4228
NSN 5975-01-247-2086
NSN 6105-01-649-0162
NSN 6130-00-686-4906
NSN 6145-00-843-8744
NSN 5996-01-452-1868
NSN 5925-01-195-8068
NSN 5920-00-938-8696
NSN 6130-00-359-2747
NSN 6150-01-581-7266