No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-01-462-1864
NSN 6130-01-172-7313
NSN 6320-00-519-0770
NSN 6135-01-392-8344
NSN 6150-01-205-7225
NSN 6620-01-237-5603
NSN 6220-00-080-2352
NSN 6150-01-509-9934
NSN 5915-01-115-7398
NSN 5985-01-462-4435
NSN 5925-00-308-2712
NSN 6130-01-501-6390