No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-408-9551
NSN 5999-01-500-1329
NSN 6685-01-389-6220
NSN 6110-01-525-7358
NSN 5985-00-257-6791
NSN 5999-00-664-1818
NSN 6645-01-508-9074
NSN 5998-00-753-7856
NSN 5945-00-040-1658
NSN 5905-01-411-5991
NSN 5915-00-027-2757
NSN 5996-00-690-0705