No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-01-433-2405
NSN 5930-00-005-0383
NSN 5965-01-215-3184
NSN 5920-00-948-9071
NSN 5996-00-275-9206
NSN 5960-01-407-1350
NSN 5985-01-565-7084
NSN 5915-01-495-1923
NSN 5965-00-233-3851
NSN 5855-01-361-9787
NSN 6145-00-233-6010
NSN 6150-00-753-3950