No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5930-01-349-8972
NSN 5945-00-841-0859
NSN 5975-01-412-6440
NSN 5996-00-889-8219
NSN 6645-01-318-7371
NSN 5999-01-559-0574
NSN 5999-01-533-5238
NSN 5915-01-500-2147
NSN 6620-01-466-4436
NSN 5835-01-150-6084
NSN 5965-00-253-1302
NSN 6145-00-682-6993