No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-00-202-1078
NSN 5960-01-381-7725
NSN 5925-01-549-7714
NSN 6130-01-464-0518
NSN 6220-00-281-9206
NSN 5985-01-652-5866
NSN 6320-01-171-3238
NSN 6685-00-948-6737
NSN 6685-00-595-5376
NSN 2925-00-265-7539
NSN 5960-01-279-0985
NSN 6110-00-521-8932