Second end has hole through .094 in. Dia
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5915-00-017-8865
NSN 6135-01-428-8821
NSN 5985-00-708-8758
NSN 5960-01-355-2968
NSN 6135-00-491-7429
NSN 6645-00-391-6264
NSN 6620-00-495-0309
NSN 6645-01-187-1790
NSN 6220-01-507-5320
NSN 6135-00-377-9165
NSN 5935-01-389-7531
NSN 6150-01-356-6976