A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Greece Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6620-00-799-4244
NSN 5985-01-476-0819
NSN 5835-01-380-5943
NSN 5920-01-642-6097
NSN 6685-01-634-0611
NSN 6645-01-370-5264
NSN 6240-01-148-4627
NSN 2925-01-309-5007
NSN 2925-01-159-8312
NSN 5960-01-270-5271
NSN 5895-00-825-7334
NSN 5905-01-605-0497