A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 5835-01-203-1871
NSN 6110-01-152-2840
NSN 6620-01-296-0873
NSN 5998-01-491-5750
NSN 5895-01-021-0818
NSN 2925-00-211-4761
NSN 6220-01-467-9608
NSN 6130-01-024-5951
NSN 6650-01-290-4001
NSN 5960-01-258-0814
NSN 6220-01-127-7172
NSN 6645-01-172-6838