No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-069-5237
NSN 2925-00-258-9786
NSN 5999-01-459-7903
NSN 5925-01-509-7873
NSN 5990-01-235-8404
NSN 5920-00-970-8419
NSN 5905-00-243-6794
NSN 6650-01-304-8132
NSN 6320-01-093-5738
NSN 6685-00-894-4524
NSN 5945-00-854-6187
NSN 5965-01-256-9460