No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-00-862-3345
NSN 5945-01-098-2150
NSN 6130-00-761-9113
NSN 6135-00-162-2437
NSN 6645-01-367-2581
NSN 5920-01-533-0603
NSN 5920-01-014-0611
NSN 6620-00-932-6508
NSN 6685-01-142-6460
NSN 6135-00-284-1406
NSN 6130-01-017-1447
NSN 6105-00-901-0673