A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5975-00-020-3271
NSN 6135-01-230-4399
NSN 5920-01-039-8099
NSN 5935-00-833-6406
NSN 5905-00-905-8582
NSN 4140-01-430-9530
NSN 6240-00-950-3859
NSN 5835-01-399-5820
NSN 5910-00-345-8105
NSN 6320-00-823-2015
NSN 5895-01-429-0257
NSN 6145-01-563-3105