A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-391-8015
NSN 5975-00-286-8506
NSN 6645-01-100-3296
NSN 5999-00-186-9314
NSN 5965-01-376-1012
NSN 5915-01-241-0253
NSN 5996-01-453-4250
NSN 5945-00-466-3748
NSN 5910-00-096-7611
NSN 5975-01-603-9953
NSN 5996-01-557-1996
NSN 5945-01-071-9645