No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-00-937-8339
NSN 6240-01-655-7354
NSN 6620-00-148-9613
NSN 6145-01-275-7540
NSN 5945-01-535-1352
NSN 5925-00-167-7513
NSN 6220-01-330-5888
NSN 5990-01-340-3575
NSN 6220-00-394-5762
NSN 6105-00-030-7608
NSN 5935-01-453-0701
NSN 5905-00-601-8410