No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-00-823-6116
NSN 6130-01-435-7169
NSN 5985-01-126-1711
NSN 6220-00-209-4368
NSN 5855-00-548-4742
NSN 6650-01-543-0588
NSN 6650-00-078-5773
NSN 6105-01-056-5258
NSN 5996-00-518-3675
NSN 5998-00-143-4723
NSN 5996-01-455-2198
NSN 7035-00-349-8571