No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-01-412-8667
NSN 5998-00-823-8488
NSN 6145-00-451-6651
NSN 6110-01-101-8338
NSN 5999-01-164-5267
NSN 5925-01-364-0771
NSN 4140-01-426-8428
NSN 6320-00-557-3079
NSN 6620-00-189-2381
NSN 5855-01-611-6544
NSN 6610-01-448-8904
NSN 6150-01-451-5564