2 threadeded inserts installed on right end, cut out on right end with 0.062 in. Depth and a 0.312 in. Lg, machine all surfaces 125.0 microinches
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of aluminum nesoi
NSN 6150-01-652-3527
NSN 5965-01-463-8176
NSN 5905-01-528-2227
NSN 6645-01-025-1002
NSN 6150-01-231-8610
NSN 5895-00-145-2657
NSN 6105-01-358-7608
NSN 5945-01-519-6190
NSN 6240-00-183-0570
NSN 5998-01-429-0119
NSN 6650-00-299-9681
NSN 6320-01-089-9086