Slots 0.750 from outside edge to slot center and 0.440 in. From slot center to nearest edge spaced 7.500 in. Apart; three insert, threaded p/n knkdl1032jt, cagec 29372 included
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of aluminum nesoi
NSN 5930-00-216-7511
NSN 6645-01-122-9430
NSN 6620-01-555-9852
NSN 6685-01-226-0990
NSN 5996-00-454-7938
NSN 7035-01-091-7481
NSN 5905-01-110-7472
NSN 7035-01-085-5955
NSN 6220-00-541-8515
NSN 6610-01-010-3159
NSN 6135-00-542-6728
NSN 5910-00-092-0913