No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-01-437-8267
NSN 5996-00-610-2055
NSN 5835-00-280-8494
NSN 5855-01-461-9207
NSN 5990-00-763-5526
NSN 5998-01-209-9919
NSN 6610-01-362-4897
NSN 5990-01-255-7387
NSN 6240-01-564-7698
NSN 5910-00-628-8794
NSN 7035-00-529-3128
NSN 5965-01-243-5494