One 0.187 in. Diameter hole, spaced 0.530 in. C to c from one large hole along the lg
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of aluminum nesoi
NSN 6135-00-643-4843
NSN 5965-01-188-7267
NSN 5990-01-004-6343
NSN 6645-01-400-2119
NSN 5996-00-199-9303
NSN 5905-01-329-0384
NSN 6320-01-284-4508
NSN 5990-01-628-8188
NSN 5855-00-256-5562
NSN 7035-01-498-9492
NSN 5945-00-401-4641
NSN 6110-01-442-7378