No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5975-01-152-2910
NSN 5935-00-100-4963
NSN 5930-01-514-8207
NSN 6685-01-236-1386
NSN 6645-01-442-6476
NSN 5975-01-597-0122
NSN 5950-01-014-7937
NSN 6130-00-359-2747
NSN 6320-01-578-6006
NSN 5895-01-330-0282
NSN 5985-01-025-9711
NSN 5975-00-768-0306