A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-01-562-2336
NSN 5985-00-467-1838
NSN 6645-01-386-6311
NSN 6110-01-242-9765
NSN 5855-01-433-7009
NSN 5999-01-528-1602
NSN 5975-01-446-6074
NSN 6130-00-235-7830
NSN 7035-01-265-2301
NSN 2925-00-759-5465
NSN 5835-01-501-0526
NSN 5915-01-544-8740