No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-535-6968
NSN 6105-01-122-0662
NSN 5950-00-221-2962
NSN 5965-00-674-5380
NSN 6145-01-381-2529
NSN 6105-01-352-8112
NSN 5960-00-946-2760
NSN 7035-01-421-4446
NSN 5945-00-101-0731
NSN 6130-01-112-0158
NSN 6110-01-633-9660
NSN 6685-00-842-5399