No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Nonelectrical articles of graphite or carbon
NSN 6620-00-140-8644
NSN 5945-00-148-8285
NSN 5996-01-024-9976
NSN 6610-01-447-5598
NSN 6685-01-054-3166
NSN 6650-00-248-8913
NSN 5930-00-117-4699
NSN 2925-01-623-9285
NSN 5990-01-259-7138
NSN 5915-01-526-7227
NSN 6650-00-130-0847
NSN 2925-00-261-5800