A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5855-00-221-9435
NSN 2925-01-011-5619
NSN 2925-01-511-2667
NSN 5895-01-350-3343
NSN 6620-01-412-7426
NSN 5999-01-319-5682
NSN 6150-01-478-4824
NSN 4140-01-480-4319
NSN 5930-01-619-2950
NSN 6620-01-535-6925
NSN 5855-01-278-8922
NSN 6610-01-089-2487