No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5835-00-289-9080
NSN 5965-00-320-1399
NSN 5945-00-813-3470
NSN 6110-01-437-8559
NSN 5935-01-444-2040
NSN 6620-00-500-0041
NSN 5905-01-298-1965
NSN 5930-00-266-8175
NSN 5998-01-502-9439
NSN 5996-00-891-9250
NSN 2925-01-440-7617
NSN 5945-01-068-2128