A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5999-00-964-5716
NSN 5945-01-389-1895
NSN 6150-01-027-6196
NSN 5920-01-462-0055
NSN 5960-00-931-0053
NSN 5999-01-100-4971
NSN 5935-01-341-2562
NSN 4140-00-344-4271
NSN 5960-01-641-5493
NSN 5935-01-034-9017
NSN 5999-01-359-6522
NSN 4140-00-617-0984