No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6240-01-334-3972
NSN 2925-01-027-1293
NSN 5835-00-665-3395
NSN 5835-00-446-2944
NSN 5990-00-324-4454
NSN 5945-00-356-9917
NSN 2925-00-888-9551
NSN 5915-01-431-9235
NSN 5835-00-431-4451
NSN 5925-01-594-1873
NSN 7035-01-048-7122
NSN 5950-01-179-9319