Washer, flat
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6320-00-070-4544
NSN 6320-01-125-3361
NSN 5999-01-484-8883
NSN 5960-01-085-1918
NSN 6240-00-256-6410
NSN 5945-01-087-7041
NSN 5998-01-341-3595
NSN 5920-01-489-7090
NSN 5855-01-536-1409
NSN 5999-01-315-0979
NSN 6610-01-314-7964
NSN 6620-00-190-8109