Washer
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6135-01-220-7193
NSN 6110-01-537-0889
NSN 6110-00-503-6643
NSN 6650-01-542-4137
NSN 5930-00-205-2945
NSN 6130-00-652-9363
NSN 5835-01-268-1924
NSN 4140-01-329-4836
NSN 6685-00-688-5154
NSN 5999-01-212-3094
NSN 5945-01-438-3139
NSN 5935-00-379-4444