Part name assigned by manufacturer washer
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6105-01-054-2346
NSN 5960-00-045-9266
NSN 6150-01-398-3931
NSN 6240-00-067-7526
NSN 6650-01-659-7844
NSN 5920-00-322-8618
NSN 5935-01-371-5519
NSN 5965-01-334-9275
NSN 6610-00-034-3709
NSN 6645-01-141-0310
NSN 7035-01-317-4227
NSN 4140-01-568-6065