No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5905-01-174-0101
NSN 6320-01-072-2073
NSN 5950-01-280-5469
NSN 6105-01-224-1950
NSN 6240-01-107-5506
NSN 6130-01-435-0879
NSN 5855-01-563-6724
NSN 5975-01-502-7338
NSN 5915-01-508-2911
NSN 5925-00-329-9190
NSN 5905-01-283-6158
NSN 5990-00-630-6154