This item is used on the drive clutch assemblies of various polaris all terrain vehicles (atv) including the sportsman mv7; 500 magnum 4x4 hds and vl hds; sportsman models 500/600/700/ho/international; dies; atp 500 4x4; and more
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-01-607-0436
NSN 6320-00-036-3688
NSN 5835-01-240-5022
NSN 5950-01-054-0769
NSN 5975-00-916-4923
NSN 6620-01-111-9064
NSN 5999-00-192-0263
NSN 5998-00-554-9725
NSN 2925-01-556-0333
NSN 5965-00-241-6424
NSN 6320-00-790-4844
NSN 6620-00-170-5296