Washer
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-420-9103
NSN 6150-01-321-0343
NSN 5835-01-328-6626
NSN 2925-01-364-7926
NSN 5998-01-085-3845
NSN 5945-00-265-1762
NSN 5960-01-110-2668
NSN 5990-01-429-6211
NSN 5990-00-067-6791
NSN 6110-00-116-5514
NSN 5965-00-768-4366
NSN 6620-00-223-0811