Original name-washer wave
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-359-2575
NSN 5855-01-145-4903
NSN 5965-01-209-2838
NSN 5895-01-422-9003
NSN 6610-01-560-7573
NSN 6240-00-935-1358
NSN 5925-00-959-4983
NSN 2925-01-394-9658
NSN 2925-01-391-1540
NSN 5915-00-525-5753
NSN 5915-00-283-1664
NSN 6320-01-441-2438