Left side along length tapered 4 degrees; aperture off center 0.115 in. From left edge along width, 0.125 in. From top along length
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Other articles of iron or steel not wire nesoi
NSN 5965-00-061-1061
NSN 6645-01-268-7265
NSN 5905-01-200-6246
NSN 5895-01-576-7172
NSN 2925-01-093-5479
NSN 5905-01-426-8975
NSN 6105-00-009-8382
NSN 5915-00-444-7908
NSN 5855-01-573-0761
NSN 5998-00-823-1126
NSN 5960-00-126-9669
NSN 6135-01-193-8154