A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-379-0820
NSN 5996-00-283-7385
NSN 6150-01-598-3218
NSN 6240-01-251-1427
NSN 2925-00-456-7627
NSN 6320-01-006-6138
NSN 5855-00-337-3679
NSN 5998-01-466-0810
NSN 5935-01-579-9841
NSN 5895-01-416-3983
NSN 6645-01-016-7706
NSN 6145-01-594-2389