C1006-c1015 steel w/hardness of rockwell b49
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 7035-01-576-1962
NSN 6130-01-313-0385
NSN 5855-01-178-1130
NSN 5930-01-350-8796
NSN 6220-01-289-3014
NSN 5935-01-212-9729
NSN 2925-01-411-4666
NSN 5998-01-371-2273
NSN 6620-01-265-2887
NSN 5950-01-417-2883
NSN 6130-01-040-2186
NSN 7035-01-106-3476