Color is red; goes to a 3/4 in tubular glass; heat resistant to 158 degree farenheit
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of vulcanized rubber other than hard rubber, nesoi
NSN 5910-01-461-3108
NSN 6240-01-633-9357
NSN 5920-01-616-5228
NSN 5960-00-160-2183
NSN 6650-00-754-2276
NSN 6145-01-446-5031
NSN 5855-01-010-4921
NSN 5996-01-473-9904
NSN 6105-01-085-0989
NSN 5996-01-264-8374
NSN 5945-00-218-0012
NSN 6620-00-952-4278