A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 7035-01-261-9850
NSN 5895-01-012-0544
NSN 5985-00-274-2851
NSN 5895-01-321-6807
NSN 5855-01-136-1916
NSN 6320-01-119-3935
NSN 5835-01-568-7796
NSN 5975-01-315-4471
NSN 5935-01-202-9840
NSN 5960-01-460-0115
NSN 5910-01-447-3405
NSN 6240-01-372-5894