90 degrees by 0.063 in. Deep notch in center of contact face, terminal has 0.375 in. Tongue extending down 0.422 in. And at 22.0 degrees angle
An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.
Classification: Carbon or graphite brushes of a kind used for electrical purposes
NSN 2925-01-347-4208
NSN 4140-01-544-5618
NSN 6130-01-535-7023
NSN 6105-01-159-6382
NSN 5945-01-054-8792
NSN 6610-01-227-7221
NSN 5925-01-007-2049
NSN 2925-00-474-4990
NSN 6610-01-573-5949
NSN 5915-01-384-2642
NSN 5999-01-417-3028
NSN 6645-01-331-5674